Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Fuel Injection System (H4DOTC)) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector from manifold absolute pressure sensor (A), and remove the filter assembly (B) from intake manifold.
  4. Remove the manifold absolute pressure sensor from the solenoid valve bracket.
    Fig 2: Identifying Manifold Absolute Pressure Sensor And Filter Assembly
    G05017812Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals