Hydraulic Control And Lubrication
WARNING: This page is about a different variant/trim than selected.
HYDRAULIC CONTROL AND LUBRICATION SPECIFICATION
| Type | Electronic/hydraulic control [5 forward gear changes made by electronic signals of vehicle speed and accelerator (throttle) opening] |
| Fluid | Specified fluid: SUBARU ATF Recommended fluid: IDE-MITSU ATF HP Castrol Transmax J Pennzoil Quaker State: Pennzoil ATF-J
NOTE:
Use of the recommended fluid is permitted only in regions where the specified fluid is not available.
|
| Fluid capacity l (US qt, lmp qt) | 9.6 - 10.0 (10.1 - 10.6,8.4 - 8.8) |
| Lubrication system | Forced feed lubrication with oil pump |