Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Intake System - Intake (Induction) (H6DO)) >> Air Intake Chamber >> Removal

Air Intake Chamber: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
  2. Loosen the clamp (A) which connects air intake chamber to throttle body.
  3. Loosen the clamp (B) which connects intake boot to air intake chamber.
  4. Remove the bolt (C) which secures air intake chamber to the stay.
    Fig 1: Identifying Air Intake Chamber Connector
    G05018623Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the blow-by hoses, then remove the air intake chamber.
scientia non olet · About Mike's Workshop Manuals