Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel Injection System (H6DO)) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connectors from the mass air flow and intake air temperature sensor.
    Fig 2: Locating Intake Air Temperature Sensor
    G05018452Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 3: Locating Intake Air Temperature Sensor Connector
    G05665296Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals