Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Controls (Diagnostics) (H4SO)) >> System Operation Check Mode >> Operation >> Fuel Pump Control (Off Operation)

Fuel Pump Control (Off Operation)

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: After performing the Operation Check Mode, perform the Clear Memory Mode <Ref. to OPERATION , Clear Memory Mode .>.
  1. On the «System Operation Check Mode» display screen, select the {Fuel Pump Control}.
  2. On the «Fuel Pump Control» display screen, select the {OFF Operation}.
  3. On the «Start the Engine» display screen, start the engine and select the [OK].
  4. Select the [NO] to end the OFF operation. The screen will return to the «Fuel Pump Control» screen.
scientia non olet · About Mike's Workshop Manuals