Section 92 (Starting System & Charging System (H4SO)): Generator: Inspection: Stator

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Continuity test
Inspect continuity between the stator coil lead wire terminals. If the resistance is 1 MΩ or more, the lead wire is damaged. Replace the stator assembly.

Fig 1: Checking Continuity Between Stator Coil Lead Wire Terminals
Courtesy of SUBARU OF AMERICA, INC.
Insulation test
Inspect the continuity between the stator coil stator core and lead wire terminals. If the resistance is 1 Ω or less, the stator coil is grounded. Replace the stator assembly.

Fig 2: Checking Continuity Between Stator Coil Stator Core And Lead Wire Terminals
Courtesy of SUBARU OF AMERICA, INC.