Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Tire Pressure Monitoring System (TPMS) (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory

Clear Memory

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select the {2. Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Tire Pressure Monitor}.
  3. Select the [OK] after the {Tire Pressure Monitor} is displayed.
  4. On the «Tire Pressure Monitor Diagnosis» display screen, select the {Clear Memory}.
  5. When "Done" and "Turn ignition switch to OFF" is shown on the display screen, turn the ignition switch to OFF and close the Subaru Select Monitor.
    NOTE: For details concerning the operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
scientia non olet · About Mike's Workshop Manuals