Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Fuel Injection System (H6DO)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
    Fig 1: Removing Collector Cover
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connectors from the engine coolant temperature sensor.
  4. Remove the engine coolant temperature sensor.
    Fig 2: Locating Engine Coolant Temperature Sensor
    G05018435Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals