Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Brake Control} and press the [YES] key.
  3. Press the [YES] key after {VDC AWD AT} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select the {Clear Memory} and press the [YES] key.
    DIAGNOSIS PROCEDURE

    Display Contents to be monitored
    Clear memory? DTC deleting function
  5. When "Done" and "Turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
    NOTE: For details concerning operation procedures, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About Mike's Workshop Manuals