Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (LAN System (Diagnostics)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC B0100 INTEG. Unit System Error

DTC B0100 INTEG. Unit System Error

WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.

DTC DETECTING CONDITION: 

System error in body integrated unit

TROUBLE SYMPTOM: 

DIAGNOSTIC PROCEDURE CHART

Step Check Yes No
1 CHECK ALL DTCS.  Is DTC concerning ECM displayed? Go to step 2.  Replace the body integrated unit. < Ref. to , BODY INTEGRATED UNIT . >
2 CHECK DTC CONCERNING ECM.  Is output DTC on ECM concerning CAN communication failure? Replace the body integrated unit. < Ref. to , BODY INTEGRATED UNIT . > Perform the diagnosis according to DTC concerning ECM.