Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Abs - Vehicle Dynamics Control (VDC) System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu», select {Each System Check}.
  2. On the «System Selection Menu», select {Brake Control}.
  3. Click the [OK] button after the {VDC} is displayed.
  4. On the «Brake Control Diagnosis», select {Clear Memory}.
  5. When the "Clear Memory?" is shown on the screen, click the [YES] button.
  6. When "Done" and "Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the help on PC application for Subaru Select Monitor.
scientia non olet · About Mike's Workshop Manuals