Check Ignition Switch Illumination
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FUSE. Remove and visually check the fuse No. 14 (in the main fuse box). |
Is the fuse blown out? | Replace the fuse with a new part. | Go to step 2 . |
2 CHECK POWER SUPPLY.
(B224) No. 2 (+) - Chassis ground (-): |
Is the voltage 10 V or more? | Go to step 3. | Check the harness for open circuits and shorts between the ignition switch illumination and fuse. |
3 CHECK IGNITION SWITCH ILLUMINATION CIRCUIT.
(B280) No. 4 - (B224) No. 1: |
Is the resistance less than 10 Ω? | Replace the ignition switch illumination bulb with a new bulb. <Ref. to REMOVAL , Ignition Switch Illumination . > | Check the harness for open circuits and shorts between the body integrated unit and ignition switch illumination. |