Idle Speed Control
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode. >.
- On the «System Operation Check Mode» display screen, select the {Idle Speed Control}.
- On the «Start the Engine» display screen, start the engine and click the [OK] button.
- In the «Idle Engine Speed Control» screen, click the [↑] button or the [↓] button to change the setting values, then click the [OK] button.
Setting is possible in a range between 500 rpm - 2,000 rpm, in increments of 50 rpm. However, the engine speed that can actually be controlled will vary depending on the vehicle.
- Click the [Cancel] button to end the idle speed control. The screen will return to the «SYSTEM OPERATION CHECK MODE » screen.
NOTE:
For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.