Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Controls - Engine (Diagnostics) (H4SO)) >> System Operation Check Mode >> Operation >> Fuel Pump Control (On/Off Drive)

Fuel Pump Control (On/Off Drive)

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: After executing the operation check mode, execute the Clear Memory Mode <Ref. to OPERATION , Clear Memory Mode. >.
  1. On the «System Operation Check Mode» display, select the {Fuel Pump Control}.
  2. On the «Fuel Pump Control» display screen, select the {ON/OFF Operation}.
  3. On the «Turn Ignition Switch ON with Engine Stalled» display screen, turn the ignition switch to ON and click the [OK] button.
  4. Click the [Cancel] button to end the ON/OFF drive. The screen will return to the «Fuel Pump Control» screen.
NOTE: For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.
scientia non olet · About Mike's Workshop Manuals