Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Occupant Detection System (Diagnostics)) >> Airbag Connector >> Procedure >> Buckle Switch

Buckle Switch

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. How to disconnect:
    1. Move the slide lock (A) in the direction of arrow.
    2. While holding the slide lock (A) in the moved position, disconnect the connector.
      Fig 1: Identifying Slide Lock
      G05003999Courtesy of SUBARU OF AMERICA, INC.
      CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
  2. How to connect:

    Holding the connector (A), and push it in carefully until a clicking sound is heard.

    Fig 2: Identifying Connector
    G05003901Courtesy of SUBARU OF AMERICA, INC.
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
scientia non olet · About Mike's Workshop Manuals