Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Wheel, Tires & Tire Pressure Monitoring System) >> Tire Pressure Monitoring System >> Removal >> Tire Pressure Monitoring Control Module

Tire Pressure Monitoring Control Module

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's seat. <Ref. to REMOVAL .>
  2. Turn up the floor mat in the driver's seat area.
  3. Remove the connector to remove tire pressure monitoring control module.
    Fig 1: Locating Tire Pressure Monitoring Control Module Bolt And Nut
    G05020177Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals