Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Engine Controls (Diagnostics) (H6DO)) >> System Operation Check Mode >> Operation >> Fuel Pump Control (On/Off Operation)

Fuel Pump Control (On/Off Operation)

WARNING: This page is about a different car, the 2007 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: After performing the Operation Check Mode, perform the Clear Memory Mode <Ref. to OPERATION , Clear Memory Mode.> and the Inspection Mode <Ref. to PROCEDURE , Inspection Mode.>.
  1. On the «System Operation Check Mode» display screen, select the {Fuel Pump Control}.
  2. On the «Fuel Pump Control» display screen, select the {ON/OFF Operation}.
  3. On the «Turn Ignition Switch ON with Engine Stalled» display screen, select the [OK].
  4. Select the [NO] to end the ON/OFF operation. The screen will return to the «Fuel Pump Control» screen.
scientia non olet · About Mike's Workshop Manuals