Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Fuel Injection (Fuel Systems) (H4SO)) >> 17.Engine Control Module (ECM) >> B: Installation

B: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

CAUTION:
  • When replacing the ECM, be careful not to use the ECM for wrong specifications to avoid any damage to fuel injection system.
  • When replacing the ECM, be careful not to damage the harnesses and connectors.

Tightening torque: 

5 N.m (0.5 kgf-m, 3.6 ft-lb) 

scientia non olet · About Mike's Workshop Manuals