Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Back-up Light System >> Inspection >> Back-Up Light Relay (5AT Model)

Back-Up Light Relay (5AT Model)

Measure the resistance between headlight relay terminals when connecting terminal No. 4 to the battery positive terminal and terminal No. 3 to the battery ground terminal.

Fig 1: Identifying Back-Up Light Relay (5AT Model) Connector Terminals
G05004074Courtesy of SUBARU OF AMERICA, INC.
TERMINAL CONTINUITY REFERENCE CHART

Continuity Terminal No. Standard
Yes 1 and 2 Less than 1 Ω
No 1 MΩ or more
NOTE: Checks other than the back-up light relay. <Ref. to INSPECTION , Inhibitor Switch .>
scientia non olet · About Mike's Workshop Manuals