Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Fuel Injection System (H4DOTC)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intercooler. <Ref. to REMOVAL , Intercooler .>
  4. Disconnect the knock sensor connector.
    Fig 2: Identifying Knock Sensor Connector
    G05017743Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the knock sensor from the cylinder block.
    Fig 3: Identifying Knock Sensor
    G04999385Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals