Data Link Connector: Note
WARNING: This page is about a different variant/trim than selected.
This connector is used both for general scan tools and the Subaru Select Monitor.
CAUTION:
Do not connect any scan tools other than general scan tools and the Subaru Select Monitor, because the circuit for the Subaru Select Monitor may be damaged.
DATA LINK CONNECTOR TERMINAL REFERENCE
| Terminal No. | Content | Terminal No. | Content |
|---|---|---|---|
| 1 | Blank | 9 | Blank |
| 2 | Blank | 10 | Blank |
| 3 | Ground | 11 | Blank |
| 4 | Blank | 12 | Blank |
| 5 | Blank | 13 | Blank |
| 6 | CAN-H | 14 | CAN-L |
| 7 | Subaru Select Monitor signal | 15 | Blank |
| 8 | Blank | 16 | Power supply |