Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Forester XT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different variant/trim than selected.
  1. On the « Main Menu » display screen, select the {Each System Check}.
  2. On the « System Selection Menu » display screen, select the {Engine Control System}.
  3. Click the [OK] button after the information of engine type has been displayed.
  4. On the « Engine Diagnosis » display screen, select the {Clear Memory}.
  5. When the "Clear Memory?" is shown on the screen, click the [Yes] button.
  6. When "Done" and "Turn ignition switch to OFF" is shown on the display screen, turn the ignition switch to OFF.
    NOTE:
    • Initial diagnosis of the electronic throttle control is performed after the memory is erased. Therefore, start the engine after 10 seconds or more have passed since turning the ignition switch to ON.
    • For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
scientia non olet · About Mike's Workshop Manuals