Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2008 >> Forester XT, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs - Vehicle Dynamics Control (VDC) System >> VDC Sequence Control >> Operation >> VDC Sequence Control With SUBARU Select Monitor

VDC Sequence Control With SUBARU Select Monitor

  1. Connect the Subaru Select Monitor to the Subaru data link connector, located next to the lower cover under the driver's side instrument panel.
  2. Turn the ignition switch ON.
  3. Run the Subaru Select Monitor.
  4. Set the Subaru Select Monitor to the "BRAKE CONTROL" mode.
  5. When the "VDC Check Mode" is selected from the "Function check sequence" menu, the "VDC sequence control" will start.
  6. "OK" will be displayed. Select the "OK".
  7. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About Mike's Workshop Manuals