B: Installation
WARNING: This page is about a different car, the 2006 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install the select cable to plate assembly.
Tightening torque:
18 N.m (1.8 kgf-m, 13.0 ft-lb)
- Install the select cable to select lever.
- Install the plate assembly to the transmission.
Tightening torque:
T: 24.5 N.m (2.5 kgf-m, 18.1 ft-lb)
- Install the washer and snap pin to range select lever.
- Move the select lever to the "N" range, then adjust the select cable position. <Ref. to ADJUSTMENT Select Cable. >
- Install the heat shield cover. (If equipped)
- Install the front and center exhaust pipe. Non-turbo model
<Ref. to INSTALLATION Front Exhaust Pipe. >
Turbo model
<Ref. to INSTALLATION Front Exhaust Pipe. >