Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Clear Memory Mode >> Operation >> General Scan Tool

General Scan Tool

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

For clear memory procedures using the general scan tool, refer to the General Scan Tool Instruction Manual.

After the memory has been cleared, the idle air control solenoid valve must be initialized. To do this, turn the ignition switch to the ON position. Wait 3 seconds before starting the engine.

scientia non olet · About Mike's Workshop Manuals