DTC 2A ODS Calibration Error
DTC DETECTING CONDITION:
System calibration (Rezeroing) was not completed properly.
DIAGNOSTIC PROCEDURE CHART
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM RE-ZEROING. Perform system calibration using the Subaru Select Monitor. < Ref. to SYSTEM CALIBRATION (REZEROING) , OPERATION, Subaru Select Monitor. > |
Did the system calibration complete properly? | Finish the diagnosis. | Follow the system calibration procedures. < Ref. to SYSTEM CALIBRATION (REZEROING) , OPERATION, Subaru Select Monitor. > |