Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2006 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (STI) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)

SUBARU Select Monitor (OBD Mode)

  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type is displayed.
  4. On the «Engine Diagnosis» display screen, select the {OBD System} and press the [YES] key.
  5. On the «OBD Menu» display screen, select the {Diagnosis Code(s) Cleared} and press the [YES] key.
  6. When the 'Clear Diagnostic Code?' is shown on the display screen, press the [YES] key.
  7. Turn the ignition switch to OFF, and then turn the Subaru Select Monitor power switch to OFF.
    NOTE: For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
scientia non olet · About Mike's Workshop Manuals