Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2006 >> Forester X, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu» display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Brake Control} and press the [YES] key.
  3. Press the [YES] key after the engine type is displayed.
  4. On the «Brake Control Diagnosis» display screen, select the {Clear Memory} and press the [YES] key.
  5. When the "Done" is shown on the display screen, turn the Subaru Select Monitor and ignition switch OFF.
    NOTE: For details concerning operation procedure, refer to the " SUBARU SELECT MONITOR OPERATION MANUAL ".
scientia non olet · About Mike's Workshop Manuals