Drive Cycled
- DRIFT DIAGNOSIS
- Make sure that the engine coolant temperature at engine starting is less than 30°C (86°F).
- Make sure that fuel of more than 9.6 l (2.5 US gal, 2.1 lmp gal), remains and the battery voltage is more than 10.9V.
- Make sure that the engine coolant temperature rises more than 10°C (18°F) from the level at engine start and is also more than 75°C (167°F).
- Idle the engine for more than 120 seconds in the condition of step 3.
- STUCK DIAGNOSIS
- Make sure that the battery voltage is more than 10.9V.
- Perform the CLEAR MEMORY MODE< Ref. to CLEAR MEMORY MODE . >
- Drive the vehicle for the distance equal to fuel of 50 l (13.2 US gal, 11.0 lmp gal).
NOTE:- It is possible to drive intermittently.
- Do not disconnect the terminal of battery during diagnosis. (If disconnecting the terminal of battery, the data will be cleared.)
DIAGNOSTIC TROUBLE CODES REFERENCE CHARTDTC Item Condition P0181 Fuel Temperature Sensor "A" Circuit Range/Performance -