Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2005 >> Baja Turbo, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type is displayed.
  4. On the << Engine Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the 'Done' and 'Turn Ignition Switch OFF' are shown on the display screen, turn the ignition switch to OFF, and then turn the Subaru Select Monitor to OFF.
    NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION  MANUAL.
scientia non olet · About Mike's Workshop Manuals