Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Brakes - Abs) >> ABS Sequence Control >> Specification >> Conditions For Completion Of Abs Sequence Control

Conditions For Completion Of Abs Sequence Control

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

When the following conditions develop, the ABS sequence control stops and ABS operation is returned to the normal control mode.

  1. When the speed of at least one wheel reaches 10km/h (6 MPH).
  2. When the brake pedal is released during ABS sequence control and the stop light switch goes OFF.
  3. After completion of ABS sequence control.
  4. When malfunction is detected.
scientia non olet · About Mike's Workshop Manuals