Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2003 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection (Fuel Systems, H4SO)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02874882Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air cleaner case.

    < Ref. to REMOVAL , Air Cleaner Case.>

  3. Disconnect knock sensor connector.
    Fig 2: Disconnecting Knock Sensor Connector
    G02874883Courtesy of SUBARU OF AMERICA, INC.
  4. Remove knock sensor from cylinder block.
    Fig 3: Removing Knock Sensor From Cylinder Block
    G02874884Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals