Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2003 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection (Fuel Systems, H4SO)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02874870Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air intake duct and air cleaner case.

    < Ref. to REMOVAL , Air Intake Duct > and < Ref. to REMOVAL , Air Cleaner Case.>

  3. Disconnect connector from engine coolant temperature sensor.
    Fig 2: Disconnecting Connector From Engine Coolant Temperature Sensor
    G02874871Courtesy of SUBARU OF AMERICA, INC.
  4. Remove engine coolant temperature sensor.
scientia non olet · About Mike's Workshop Manuals