Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2003 >> Outback Base, 4D Sedan >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) (Diagnostics) >> VDCCM Connector Cover >> Remove

VDCCM Connector Cover: Remove

  1. Turn ignition switch OFF.
  2. Disconnect connector from VDCCM.
  3. Remove band.
  4. Remove cable clamp cover.
  5. Remove screws securing connector cover.
    CAUTION: Do not allow harness to catch on adjacent parts during installation.
    Fig 1: Removing Screws Securing Connector Cover
    G02874081Courtesy of SUBARU OF AMERICA, INC.
  6. Remove connector cover.
    Fig 2: Removing Connector Cover
    G02874082Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals