Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2003 >> Impreza RS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel System - DOHC/TC) >> Fuel Level Sensor >> Removal

Fuel Level Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel on the floor.
NOTE: Fuel level sensor is built in fuel pump assembly.
  1. Remove the fuel pump assembly, see REMOVAL , Fuel Pump.
  2. Disconnect the connector from the fuel pump bracket.
    Fig 1: Disconnecting Connector From Fuel Pump Bracket
    G02686772Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolt which installs the fuel level sensor on mounting bracket.
    Fig 2: Removing Bolt Which Installs Fuel Level Sensor Onto Mounting Bracket
    G02686773Courtesy of SUBARU OF AMERICA, INC.