Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Fuel Injection (Fuel Systems) (H4SO)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G00898764Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air cleaner case. Refer to REMOVAL , Air Cleaner Case.
  3. Disconnect knock sensor connector.
    Fig 2: Disconnecting Knock Sensor Connector
    G00898765Courtesy of SUBARU OF AMERICA, INC.
  4. Remove knock sensor from cylinder block.
    Fig 3: Removing Knock Sensor From Cylinder Block
    G00898766Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals