Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Fuel Injection (Fuel Systems) (H4SO)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G00898753Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air intake duct and air cleaner case. Refer to REMOVAL , Air Intake Duct and REMOVAL , Air Cleaner Case.
  3. Disconnect connector from engine coolant temperature sensor.
    Fig 2: Disconnecting Connector From Engine Coolant Temperature Sensor
    G00898754Courtesy of SUBARU OF AMERICA, INC.
  4. Remove engine coolant temperature sensor.
scientia non olet · About Mike's Workshop Manuals