Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Fuel Injection (Fuel Systems, H4SO)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02874870Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air intake duct and air cleaner case.

    < Ref. to REMOVAL , Air Intake Duct > and < Ref. to REMOVAL , Air Cleaner Case.>

  3. Disconnect connector from engine coolant temperature sensor.
    Fig 2: Disconnecting Connector From Engine Coolant Temperature Sensor
    G02874871Courtesy of SUBARU OF AMERICA, INC.
  4. Remove engine coolant temperature sensor.
scientia non olet · About Mike's Workshop Manuals