Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Fuel Injection (Fuel Systems, H4SO)) >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Tightening torque: 

  1. T:  6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
Fig 1: Installing Crankshaft Position Sensor
G02874876Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals