Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Fuel Injection (Fuel Systems, H6DO)) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different car, the 2003 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery ground cable from battery ground terminal.
    Fig 1: Disconnecting Battery Ground Cable From Battery Ground Terminal
    G02877122Courtesy of SUBARU OF AMERICA, INC.
  2. Remove intake manifold.

    < Ref. to REMOVAL , Intake Manifold.>

  3. Disconnect knock sensor connector.
  4. Remove knock sensor from cylinder block.
    Fig 2: Removing Knock Sensor From Cylinder Block
    G02877123Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals