Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Fuel Injection (Fuel Systems, H6DO)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2003 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02877109Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect connector from engine coolant temperature sensor.
  3. Remove engine coolant temperature sensor.
    Fig 2: Removing Engine Coolant Temperature Sensor
    G02877110Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals