Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System >> Service Procedure >> Evacuating And Charging >> Charge The System

Charge The System

  1. With the refrigerant source connected and the service hose purged, slowly open the low-pressure manifold valve, while checking the low-pressure gauge reading.
    CAUTION: The refrigerant source must be positioned for vapor (valve up).
    Fig 1: Reading Low-Side Pressure Gauge
    G02002835
  2. Keep the low side pressure below 276 kPa (2.81 kg/cm2 , 40 psi) by using the low-pressure manifold valve to regulate the flow of refrigerant into the system.
  3. When the system is fully charged, close the low-pressure manifold valve.
  4. Close the valve at the refrigerant source.
    Fig 2: Refrigerant Capacity Chart
    G02002836