Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Overhaul & Servicing) >> Transfer Driven Gear >> Assembly

Transfer Driven Gear: Assembly

WARNING: This page is about a different car, the 2001 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ball bearing.
    CAUTION: Do not apply pressure in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton)
    Fig 1: Installing Ball Bearing
    G02060200
  2. Install ball bearing (other side)
    CAUTION: Do not apply pressure in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton)
    Fig 2: Installing Ball Bearing On Other Side Of Shaft
    G02060201
scientia non olet · About Mike's Workshop Manuals