Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 1998 >> Legacy Outback, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> A/C-Heater System >> A/C System Specifications

A/C System Specifications

WARNING: To avoid injury from accidental air bag deployment, read and follow all SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM procedures in AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section.
A/C SYSTEM SPECIFICATIONS

Application Specification
Compressor Type (1) Zexel DKV-14D 6-Cyl.
Compressor Belt Deflection
New Belt 19/64-21/64" (7.5-8.5 mm)
Used Belt 23/64-13/32" (9.0-10.0 mm)
Compressor Oil Capacity (2)
Refrigerant (R-134a) Capacity 21-24 ozs.
System Operating Pressures (3)
High Side 187-249 psi (13.1-17.5 kg/cm2 )
Low Side 19-36 psi (1.3-2.5 kg/cm2 )
(1) Use ZXL200PG (DH-PR) type "R" oil (Part No. K0010FS100).
(2) Information is not available at time of publication.
(3) Specifications with ambient temperature at 80°F (27°C), humidity at 60 percent, and engine speed at 1500 RPM.