Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 1994 >> SVX LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Servicing - A/T) >> Lubrication >> Checking Fluid Level >> Transaxle

Checking Fluid Level: Transaxle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1991 Subaru XT6, 1991 Subaru XT, 1990 Subaru XT6, 1990 Subaru XT, and 1989 Subaru XT6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bring engine to normal operating temperature. Park vehicle on level floor. Engage transaxle in all gear positions.
  2. Set transmission selector lever in the "P" position with engine idling. Remove dipstick and clean with lint-free cloth. Insert and remove dipstick. Fluid level should be above center of upper and lower marks. Add if necessary. DO NOT  overfill.
scientia non olet · About Mike's Workshop Manuals