Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 1993 >> Justy Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Wiper/Washer System) >> Component Testing >> Rear Washer Motor >> Operational Test

Operational Test

WARNING: This page is about a different car, the 1993 Subaru Legacy and 1993 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect washer motor harness connector. Remove motor (if necessary). Apply battery voltage to terminal No. 2 and ground terminal No. 1 of washer motor connector. SeeFigure . If washer motor does not operate, replace washer motor.