Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 1991 >> XT Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Servicing - A/T) >> Lubrication >> Checking Fluid Level >> Transaxle

Checking Fluid Level: Transaxle

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 1989 Subaru GL, 1989 Subaru DL, 1988 Subaru GL, 1988 Subaru DL, and 1987 Subaru XT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bring engine to normal operating temperature. Park vehicle on level floor. Engage transaxle in all gear positions.
  2. Set transmission selector lever in the "P" position with engine idling. Remove dipstick and clean with lint-free cloth. Insert and remove dipstick. Fluid level should be above center of upper and lower marks. Add if necessary. DO NOT  overfill.
scientia non olet · About Mike's Workshop Manuals