Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Service Information >> Steering Angle Sensor >> Installation [07/2015 - ] >> Procedure

Installation [07/2015 - ]: Procedure

  1. INSTALL STEERING ANGLE SENSOR 

    HINT: 

    • If the steering angle sensor is removed from the spiral cable, the steering angle sensor absolute angle could change, therefore, do not remove the steering angle sensor from the spiral cable.
    • When replacing the steering angle sensor, replace it together with the spiral cable.

      Refer to INSTALLATION [07/2015 - ]

scientia non olet · About Mike's Workshop Manuals