DTC B2313: Glass Position Initialization Incomplete [05/2013 - 01/2014]: Procedure

PERFORM INITIALIZATION
1. Initialize the power window regulator motor assembly LH. Refer to INITIALIZATION [05/2013 - 01/2014] .
NEXT: Go to next step
CHECK DTC
1. Clear the DTC. Refer to DTC CHECK / CLEAR [05/2013 - ] .
2. Check for DTC. Refer to DTC CHECK / CLEAR [05/2013 - ] .
  OK
  
  DTC B2313 is not output
NG → See step 3

OK → END (POWER WINDOW CONTROL SYSTEM WAS NOT INITIALIZED)
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH. Refer to REMOVAL [05/2013 - 01/2014]