Data List / Active Test
- DATA LIST NOTE:
In the table below, the values listed under Normal Condition are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body / Data List.
- According to the display on the Techstream, read the Data List.MAIN BODY
Tester Display Measurement Item/Range Normal Condition Diagnostic Note Back Door Courtesy SW Back door courtesy switch signal / OFF or ON OFF: Back door is closed
ON: Back door is open- FR Door Lock Pos Front door unlock detection switch RH signal / LOCK or UNLOCK LOCK: Front RH door locked
UNLOCK: Front RH door unlocked- FR Door Courtesy SW Front RH door courtesy light switch signal / OFF or ON OFF: Front RH door closed
ON: Front RH door opened- FL Door Lock Pos Front door unlock detection switch LH signal / LOCK or UNLOCK LOCK: Front LH door locked
UNLOCK: Front LH door unlocked- FL Door Courtesy SW Front LH door courtesy light switch signal / OFF or ON OFF: Front LH door closed
ON: Front LH door opened- Wireless Control Wireless door lock control function / OFF or ON Customized setting displayed - Hazard Answer Back Hazard answer back of wireless / OFF or ON Customized setting displayed - Open Door Warning Open door warning / OFF or ON Customized setting displayed - Wireless Buzzer Resp Buzzer answer-back of wireless / OFF or ON Customized setting displayed - Wireless Buzzer Vol Wireless door lock buzzer volume / Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Customized setting displayed - Wireless Auto Lock Automatic lock function / OFF or ON Customized setting displayed - Unlock 2 Operation 2 times operation of wireless unlock / OFF or ON Customized setting displayed - Panic Function Panic function / OFF or ON Customized setting displayed - Auto Lock Time Automatic lock time / 30 s, 60 s or 120 s Customized setting displayed - The Number of DTC Number of DTCs / 0 to 255 Number of DTCs displayed -
- ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body / Active Test.
- According to the display on the Techstream, perform the Active Test.
MAIN BODYTester Display Test Part Control Range Diagnostic Note Hazard Turn signal flasher assembly OFF / ON - Illuminated Entry System Interior light (Interior light switch is in DOOR position and all doors are closed) OFF / ON - Wireless Buzzer Wireless door lock buzzer OFF / ON - Vehicle Horn Vehicle horns OFF / ON -